Programming Code Support

1. Make sure the door is open. 2. If you have not enabled a programming code, press and release the program button. You will hear two beeps. If you have enabled a programming code, enter you programming code, then press Kwikset. You will hear one short beep...

No this is a digital lock, but not a smart lock

1. Open the door. 2. Remove battery cover. 3. Press the program button once. 4. Enter new user code. 5. Press lock button. 6. If programming is successful the keypad will flash green once, and you will hear one beep.

Please open the Powerbolt 2 Programming Instructions pdf.

How to change your Programming Code The Programming Code will not unlock your door. It is an added security feature that is used to set up all functions. The default Programming Code is 0-0-0-0. It is recommended that you change it to a code of your own. 1....

Make sure your door is open and unlocked 1. Enter your existing PC (Programming Code). 2. Press "Kwikset" then "4" then "Kwikset" 3. Enter a new PC. It must be between 4 and 10 digits. 4. Press "Kwikset" For all programming sequences, success is indicated when...

For security reasons the first 4 digits of each user code must be unique, for example you are unable to program 48151 and 48152 If you have disabled user codes you will not be able to add user codes.

1) A programming code enables you to make changes without needing to access the programming button. This is ideal for landlords to allow programming from the outside, without access to the interior program button. Please note that once a programming code is...